Introduction
The Wax Removal Truck is a specialized oilfield vehicle designed to remove paraffin deposits using a high-pressure hot water and steam system, suitable for the maintenance of oil wells and pipelines.
Parameter
|
Category |
Item |
Specification |
|
General |
Product Name |
Wax Removal Truck |
|
Drive Type |
8×4 |
|
|
Chassis Model |
SX1316NR466 |
|
|
Engine Model |
WP10.336E40 |
|
|
Engine Power |
360 kW (489 HP) |
|
|
Overall Dimensions |
12000 × 2500 × 3620 mm |
|
|
Curb Weight |
28,430 kg |
|
|
Gross Weight |
28,560 kg |
|
|
Max Speed |
110 km/h |
|
|
Cleaning System |
Cold Washing Pressure |
60 MPa |
|
Hot Washing Pressure |
20 MPa |
|
|
Cold Washing Flow Rate |
80 m³/h |
|
|
Hot Washing Flow Rate |
20 m³/h |
|
|
Max Outlet Temperature |
160°C |
|
|
Pump System |
Pump Model |
XJⅢ Triplex Plunger Pump |
|
Max Input Power |
145 kW |
|
|
Plunger Diameter |
φ100 mm |
|
|
Stroke |
135 mm |
|
|
Max Speed |
280 rpm |
|
|
Boiler System |
Type |
Direct-fired Circulating Boiler |
|
Thermal Power |
1000–1300 kW |
|
|
Working Pressure |
20 MPa |
|
|
Fuel Type |
Diesel |
|
|
Fuel Consumption |
33.7–109.6 kg/h |
|
|
Storage System |
Water Tank Capacity |
4000 L |
|
Fuel Tank Capacity |
650 L |
|
|
Pipeline System |
Suction Pipe |
φ108 mm |
|
Discharge Pipe |
φ50 mm |
|
|
Structure |
Frame Material |
High-strength steel welded structure |
|
Compressive Strength |
≥600 MPa |
|
|
Service Life |
8–10 years |
|
|
Control System |
Operation Mode |
Cabin centralized control |
|
Control Type |
Manual / PLC optional |
Features of Wax Removal Truck
High-Pressure Cleaning System
The Wax Removal Truck features a three-cylinder plunger pump configuration, delivering a maximum pressure of 60 MPa and a flow rate of 80 m³/h, enabling the rapid removal of high-hardness paraffin layers within pipelines.
High-Temperature Heating System
Equipped with an 18–1300 kW direct-fired boiler system, it achieves a maximum output temperature of 160°C, ensuring that wax remains in a continuously molten state, even in low-temperature oilfield environments.
Dual-Mode Hot/Cold Switching System
Supports seamless switching between two distinct modes-60 MPa cold flushing and 20 MPa hot washing-to effectively adapt to varying conditions involving different wax accumulation thicknesses.
Customization
|
Item |
Description |
|
Chassis Configuration |
6×4 or 8×4 heavy-duty chassis structures are available for selection. |
|
Heating System Power |
Boiler output can be configured from 400 kW to 1300 kW according to paraffin removal intensity requirements. |
|
High-Pressure Pump Parameters |
Plunger pump pressure range can be adjusted from 35–60 MPa to match different levels of pipeline blockage. |
|
Tank & Fluid Storage System |
Customizable 4000 L water tank or larger capacity structures are available to meet long-duration operation requirements. |
|
Control System |
Optional cab-integrated control or PLC automatic control systems are available to improve operational efficiency. |
|
Piping & Injection Structure |
High-pressure hoses, nozzle angles, and anti-freezing structural designs can be customized based on well depth requirements. |
FAQ
Q: Can I take a virtual tour of your factory?
A: Certainly. We can show you our workshops, warehouses, and offices via video.
Q: What are the payment terms for the Wax Removal Truck?
A: We typically require a 30% down payment followed by the remaining 70% prior to shipment; payment via Letter of Credit (L/C) is also accepted.
Q: Which trade terms do you support?
A: We can provide quotations based on international trade terms such as FOB, CIF, and CFR, facilitating customs clearance and shipping arrangements for importers in various countries.
Q: What is the Minimum Order Quantity (MOQ)?
A: The MOQ is one unit; we accept both single-unit purchases and bulk orders.
Q: What is the delivery lead time?
A: The standard production cycle is 30–45 days; the exact timeframe may vary slightly depending on the specific configuration and customization requirements.
Q: How is the unit packaged and transported?
A: The unit is either fully protectively wrapped or shipped as a bare unit with anti-rust treatment applied. It is suitable for transport via Ro-Ro (Roll-on/Roll-off) vessels or standard shipping containers.
Q: Is the unit tested before leaving the factory?
A: The Wax Removal Truck undergoes comprehensive system testing prior to shipment, including checks on the high-pressure system, heating system, and chassis operational performance.
Q: What is the warranty period?
A: We offer a 12-month warranty on core components, covering the pump system, boiler system, and control system.
Q: What is the working principle of the Wax Removal Truck?
A: The Wax Removal Truck utilizes a high-pressure pump to deliver a cleaning medium, combined with high-temperature heating, to soften wax deposits inside pipelines for subsequent flushing and removal.
Q: What types of cleaning media are compatible with the unit?
A: The unit can process clean water, hot water, and non-corrosive industrial cleaning fluids, making it suitable for pipeline and oilfield cleaning operations.
Q: Does the unit require installation?
A: The Wax Removal Truck is delivered as a fully assembled, complete vehicle. Upon arrival at the site, it requires only a basic inspection before being put into immediate operation; no complex installation procedures are required.
Certificate
Our company has obtained API Q1 certification and authorization to use the API Monogram, and has successfully passed the ISO 9001, ISO 14001, and ISO 45001 management system certifications.
Hot Tags: wax removal truck, China wax removal truck manufacturers, suppliers, factory, Acidizing Pump Skid, Batch Mixer Trailer, Double Pump Cementing Trailer, Single Pump Cementing Skid, Wax Removal Truck, Well Washing Truck